You Sketch
Concept imageA steel Texas for your European mount. The skull slides onto one laser-cut prong through the hole in the base of the skull, and the plaque hangs flat on two screws. No drilling the skull, no wire, no wood board. Weld one prong, paint it, and hang it. Laser cut from 10 ga steel in Greenville, Texas.
Coming soonEvery kit is prototyped and test-built before it goes on sale.
Ask about this kitGood to knowSkull not included.
Ships flat in 1 parcel box, 20 × 19 × 3 in, about 6.5 lb.
17-15/16 × 16-7/8 in flat, 5.6 lb each
2-5/8 × 2-3/16 in flat, 0.1 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
Tell us you’re interested in this kit and our team will follow up when it’s ready. No account needed.
Ask about this kit
Concept imageThe classic Texas barn star, in steel you weld yourself. Ten laser-cut 10 ga facets rise to a point over five ribs and a back plate, and every facet drops onto tabs that put it in exactly the right place. 18 inches across, it hangs on one screw.
Concept image2 designs
A 4-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.
Concept image2 designs
A 6-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.