You Sketch
Concept imageKeep the firewood by the fireplace in something that'll outlast the house. A mountain range with pines and a river is cut through the front and back walls, a pine through each end, and a solid floor keeps bark off the hearth. Every part is laser cut from 10 ga steel and locates itself with tabs and slots: stand it up on end, drop on the last panel, and weld 18 short tabs from the outside. Cut in Greenville, Texas.
Coming soonEvery kit is prototyped and test-built before it goes on sale.
Ask about this kitGood to knowIndoors, keep it at least 3 ft from the fireplace or stove opening, and never put hot ashes in it.
Ships flat in 1 parcel box, 22 × 15 × 3 in, about 34 lb.
13 × 16 in flat, 6.7 lb each
20 × 9 in flat, 5.7 lb each
20 × 11-1/2 in flat, 8.5 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
Tell us you’re interested in this kit and our team will follow up when it’s ready. No account needed.
Ask about this kit
Concept imageThe classic Texas barn star, in steel you weld yourself. Ten laser-cut 10 ga facets rise to a point over five ribs and a back plate, and every facet drops onto tabs that put it in exactly the right place. 18 inches across, it hangs on one screw.
Concept image2 designs
A 4-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.
Concept image2 designs
A 6-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.