You Sketch
Concept imageFour mantel stocking holders that won't tip: Texas, a snowflake, a star and a pine. Each stands on a 1/2 in steel base and holds a stocking up to 7 lb. Every part is laser cut and locates itself: the hook straddles the base, the shape slides down over the hook, and a few short beads finish each one. Cut in Greenville, Texas.
Coming soonEvery kit is prototyped and test-built before it goes on sale.
Ask about this kitGood to knowKeep stockings clear of the fire.
Ships flat in 1 parcel box, 12 × 8 × 6 in, about 21 lb.
4-1/2 × 5-1/2 in flat, 3.5 lb each
9-1/8 × 5-1/8 in flat, 0.6 lb each
5-5/16 × 6-9/16 in flat, 0.8 lb each
5-5/8 × 7-5/16 in flat, 0.9 lb each
5-5/16 × 7-7/16 in flat, 0.8 lb each
5-9/16 × 7-1/4 in flat, 1.1 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
Tell us you’re interested in this kit and our team will follow up when it’s ready. No account needed.
Ask about this kit
Concept imageThe classic Texas barn star, in steel you weld yourself. Ten laser-cut 10 ga facets rise to a point over five ribs and a back plate, and every facet drops onto tabs that put it in exactly the right place. 18 inches across, it hangs on one screw.
Concept image2 designs
A 4-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.
Concept image2 designs
A 6-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.