You Sketch
Concept imageTwelve steel leaves fan out around a hex fire pan, like an agave in the Hill Country sun. The tall leaves rise off the pan and curl out at the top, the short ones spread low around it, and the leaves are the legs. Every part is laser cut and locates itself with tabs and slots: build the pan on a scrap of 2x6, weld it, then slide the leaves in underneath. Cut in Greenville, Texas.
Coming soonEvery kit is prototyped and test-built before it goes on sale.
Ask about this kitGood to knowOutdoors only, on a non-combustible surface. The steel gets hot enough to burn.
Ships flat in 2 parcel boxes, 25–26 lb each.
11-1/4 × 22-1/8 in flat, 2.9 lb each
11-1/4 × 12-1/8 in flat, 2 lb each
18-3/16 × 16-1/2 in flat, 8.6 lb each
9 × 6-1/8 in flat, 2 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
Tell us you’re interested in this kit and our team will follow up when it’s ready. No account needed.
Ask about this kit
Concept image2 designs
A 24-inch square fire pit you weld yourself. Ten laser-cut 10 ga steel parts lock together with box-jointed corners and tab-and-slot joints, so it squares itself up before you strike an arc.
Concept image2 designs
A 30-inch square fire pit you weld yourself. Ten laser-cut 10 ga steel parts lock together with box-jointed corners and tab-and-slot joints, so it squares itself up before you strike an arc.
Concept image2 designs
A 36-inch square fire pit you weld yourself. Ten laser-cut 10 ga steel parts lock together with box-jointed corners and tab-and-slot joints, so it squares itself up before you strike an arc.