You Sketch
Concept imageThe same self-squaring Lone Star design, sized for smaller patios. Ten laser-cut 10 ga steel parts with box-jointed corners, a floor on tabs, and a cap rim, with Texas star cutouts on all four sides. Ships flat in two boxes. Cut in Greenville, Texas.
$326Free shipping to the lower 48. Tax is added at checkout.
Good to knowOutdoor use only. Use on a non-combustible surface, at least 10 ft from structures. Check local burn bans.
Ships flat in 2 parcel boxes, 26 × 19 × 3 in, about 40 lb each.
24 × 16-1/8 in flat, 11.6 lb each
24 × 12 in flat, 10.7 lb each
24 × 2-1/2 in flat, 2.3 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
$326, laser-cut in Greenville, Texas and shipped flat in 2 parcel boxes. Free shipping to the lower 48; tax is added at checkout.
Concept imageThe classic Texas barn star, in steel you weld yourself. Ten laser-cut 10 ga facets rise to a point over five ribs and a back plate, and every facet drops onto tabs that put it in exactly the right place. 18 inches across, it hangs on one screw.
Concept imageA half cooking grate you weld yourself, made to sit on the FP30 Lone Star fire pit. Laser-cut 10 ga steel bars stand on edge and lock into two cross ties and two handle rails, 20 parts in all. It covers half the pit, so you can cook on one side and feed the fire on the other.
Concept imageA 4-inch steel die you weld yourself. Six laser-cut 10 ga faces box-joint together on all twelve edges, the pips are cut clean through, and the one is a Lone Star. Opposite faces add up to 7, like a real die.