You Sketch
Concept imageYour knock-down camp kit comes apart into a stack of steel plates. This caddy keeps them together. The plates stand in it like files, on both sides of a center handle: carry it to camp, then stand it on a garage shelf until the next trip. Seven laser-cut 10 ga steel parts slot together in a minute with no tools and no welding, just like the kits. Cut in Greenville, Texas.
Coming soonEvery kit is prototyped and test-built before it goes on sale.
Ask about this kitGood to knowLoad only cold parts. A loaded caddy weighs up to about 50 lb; lift with your legs.
Ships flat in 1 parcel box, 27 × 20 × 3 in, about 14.7 lb.
24-3/16 × 17-3/4 in flat, 4.3 lb each
24-3/16 × 5-1/2 in flat, 2.6 lb each
22-5/16 × 1-1/4 in flat, 0.9 lb each
8 × 5-1/2 in flat, 1.1 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
Tell us you’re interested in this kit and our team will follow up when it’s ready. No account needed.
Ask about this kit
Concept imageFlat pack, no welding
A standing-height table for Dutch oven cooking that goes together with no tools and packs flat. Nine laser-cut 10 ga steel parts: two splay-legged trestles, a back windscreen, a front apron with a lip, four locking ribs, and a solid 24 x 14 in deck for the ovens and their coals.
Concept imageFlat pack, no welding · 2 designs
A raised fire pan for wood fires that goes together with no tools and packs flat. Ten laser-cut 10 ga steel parts: two end panels that are also the legs, two side walls, three locking ribs, a solid floor 8 in off the ground, and two half grates for cooking over the coals.
Concept imageFlat pack, no welding · 2 designs
A portable charcoal grill that slots together in a minute with no tools and packs flat. Nine laser-cut 10 ga steel parts lock each other in place, with a solid charcoal floor, two cooking grates on a center rib, and Lone Star cutouts. Weld it if you want it permanent.