You Sketch
Concept imageNine laser-cut 10 ga steel parts slot together in a minute, with no tools, no bolts and nothing to lose. The end panels lock the corners, a center rib holds up the grates, and a solid floor catches the ash. When you're done, it comes apart and packs flat in one box. Lone Star cutouts, a grate lifter and a bottle opener included. Cut in Greenville, Texas.
Coming soonEvery kit is prototyped and test-built before it goes on sale.
Good to knowOutdoors only, on bare ground, gravel, stone or concrete.
Ships flat in 1 parcel box, 24 × 15 × 4 in, about 40 lb.
22 × 8-1/8 in flat, 6.2 lb each
14 × 10-1/4 in flat, 4.8 lb each
19-13/16 × 12-1/8 in flat, 9 lb each
21-1/8 × 1-1/4 in flat, 1 lb each
9-7/8 × 13 in flat, 3.2 lb each
9 × 2-3/16 in flat, 0.5 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
Tell us you’re interested in this kit and our team will follow up when it’s ready. No account needed.
Ask about this kit
Concept imageThe classic Texas barn star, in steel you weld yourself. Ten laser-cut 10 ga facets rise to a point over five ribs and a back plate, and every facet drops onto tabs that put it in exactly the right place. 18 inches across, it hangs on one screw.
Concept imageA half cooking grate you weld yourself, made to sit on the FP30 Lone Star fire pit. Laser-cut 10 ga steel bars stand on edge and lock into two cross ties and two handle rails, 20 parts in all. It covers half the pit, so you can cook on one side and feed the fire on the other.
Concept imageA 30-inch square fire pit you weld yourself. Ten laser-cut 10 ga steel parts lock together with box-jointed corners and tab-and-slot joints, so it squares itself up before you strike an arc.