You Sketch
Concept imageA V-shaped charcoal grill for the campsite, the hunting lease or the beach. Six 10 ga steel parts go together in a minute. The side plates hook onto the end plates and lock themselves by gravity, a center rib drops in, and the one-piece grate drops on. The V gathers the coals and a slit along the bottom feeds them air, so one chimney of charcoal cooks the whole grate. Cut in Greenville, Texas.
Good to knowOutdoors only, on bare ground, gravel, stone or concrete. Ash falls through the slit, so never use it on a deck, a table or a tailgate.
Ships flat in 1 parcel box, 24 × 15 × 3 in, about 26 lb.
14 × 9-1/8 in flat, 2.8 lb each
19 × 8-1/4 in flat, 5.5 lb each
18-7/8 × 1 in flat, 0.7 lb each
21-3/4 × 12-13/16 in flat, 7.3 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
$136, laser-cut in Greenville, Texas and shipped flat in 1 parcel box. Free shipping to the lower 48; tax is added at checkout.
Concept imageFlat pack, no welding
A standing-height table for Dutch oven cooking that goes together with no tools and packs flat. Nine laser-cut 10 ga steel parts: two splay-legged trestles, a back windscreen, a front apron with a lip, four locking ribs, and a solid 24 x 14 in deck for the ovens and their coals.
Concept imageFlat pack, no welding
A steel caddy that carries and stores one knock-down camp kit (the PG20 Pack Grill, VG18 V Grill or OF20 Overland Fire Pan). The plates stand in it like files on both sides of a center handle. Seven laser-cut 10 ga parts slot together with no tools and no welding.
Concept imageFlat pack, no welding · 2 designs
A raised fire pan for wood fires that goes together with no tools and packs flat. Ten laser-cut 10 ga steel parts: two end panels that are also the legs, two side walls, three locking ribs, a solid floor 8 in off the ground, and two half grates for cooking over the coals.