You Sketch
Concept imageOur self-squaring fire pit at full ranch size, built for six around the fire, with a mountain scape of peaks, pines and a river cut through all four sides. Ten laser-cut 10 ga steel parts square themselves up with box-jointed corners, a floor on tabs, and a 3-1/2 in cap rim. Ships flat in four boxes, or pick it up in Greenville, Texas.
Good to knowOutdoor use only. Use on a non-combustible surface, at least 10 ft from structures. Check local burn bans.
Ships flat in 4 parcel boxes, 36–43 lb each.
36 × 20-1/8 in flat, 21 lb each
36 × 18 in flat, 24 lb each
36 × 3-1/2 in flat, 4.8 lb each
The illustrated assembly guide walks through every fit-up, tack and weld. Download the guide (PDF).
$625, laser-cut in Greenville, Texas and shipped flat in 4 parcel boxes. Free shipping to the lower 48; tax is added at checkout.
Concept image2 designs
A 24-inch square fire pit you weld yourself. Ten laser-cut 10 ga steel parts lock together with box-jointed corners and tab-and-slot joints, so it squares itself up before you strike an arc.
Concept image2 designs
A 30-inch square fire pit you weld yourself. Ten laser-cut 10 ga steel parts lock together with box-jointed corners and tab-and-slot joints, so it squares itself up before you strike an arc.
Concept image2 designs
A 36-inch hexagon fire pit you weld yourself. Fifteen laser-cut 10 ga steel parts: six identical panels whose angled finger joints line up the corners, a three-piece floor on tabs and a six-piece cap rim.